SC-2500 Corridor Operator

Description

⊡ Sliding Door Lock

⊡ Chain Function w/ Rack & Pinion Drive

⊡ Maximum Security

Power Variations

⊡ 120 VAC Gear Motor

⊡ 230 VAC Gear Motor

⊡ 24 VDC Gear Motor

Standard features

⊡ Current Limiting Dr Pressure

⊡ Non-Handed Mechanism

⊡ Rack & Pinion Gear Drive

⊡ (Simulates Chain Operation)

⊡ Heavy Duty Const (10 Ga Top - 7 Ga Hsg)

⊡ Sloped Top Housing

⊡ 2 Point Rear Deadlocking

⊡ Door Position Indicator

⊡ Deadlock Position Indicator

⊡ Emergency Manual Release

⊡ Easy Connect Field Wiring

Optional Functions

⊡ Mechanical Release Cabinet with Lever Control for All Door Emergency Release

⊡ Mechanical and/or Electric Key Release by Paracentric Key in Column at Front of Door

⊡ Mechanical and/or Release by Mogul Cylinder in Column at the Front of the Door

⊡ Wire Harness with Plug Connections for Ease of Interconnection of Doors in Cell Runs

⊡ Custom Controls from Mechanical Release Cabinet - (See Control Section for More Details)

Operation

Unit opens and closes electrically while deadlocking in each direction. If stopped in mid-travel, the door is back-drivable. Unit may be instantly reversed. Door blockage will not cause motor damage. Door pressure is adjustable from approximately 40 lbs. Emergency release allows the door to move against slight motor pressure and is never free-wheeling.

Function

The SC-2500 corridor operator is a motorized sliding door device providing electrical opening and closing for a corridor door. The door is powered by means of push buttons or a selector switch. When the door is opened or closed, it may be stopped in mid- travel. During that period, the door may be manually moved open or closed by applying a slight force on the door. The door may also be instantly reversed without any harm to the mechanism. Upon fully opening or closing, the door is locked at two concealed points at the vertical lock column. The locking rod is also fully deadlocked preventing the rod from being manipulated. No locking components are exposed. During a power loss, the SC-2500 may be mechanically released by key, at which point the door may be moved to an open or closed position. The door is never free-wheeling. The SC-2500 sliding device has been rigorously tested to over 500,000 cycles.

Electro/Mechanical Drive System

⊡ Non-Handed - Easy Access 10” x 10¾” Mechanism Assy

⊡ All Mechanism Assy Parts - Corrosive Resistant Materials

⊡ Gear Motor - 120 VAC, 60 Hz

⊡ Gear Motor - 230 VAC, 50/60 Hz

⊡ Gear Motor - 24 VDC

⊡ Electronically Controlled Adjustable Door Pressure

⊡ Logic Board Allows a Variety of Control Voltages

⊡ Modular Easy Access Motor and Indicator Limit Switches

⊡ Easy Access Motor Drive and Logic Board

Structural Components

⊡ 7 Gauge Steel Housing with 10 Gauge Hinged Top/Cover

⊡ 10 Gauge Door Receiver

⊡ ¼” Door Hanger, Door Angle and Door Guide

⊡ 3/8” Front and Rear Carriage Plates

⊡ 9/16” CRS 1045 High Carbon Track

⊡ 1½” x 1½” Tubular - Square Vertical Lock Column

⊡ ¼” x ¾” Vertical Lock Rod

⊡ Steel Rollers with Ball Bearings attached with ½” Dia. HHCS

⊡ 16 Gauge Wire Tray

Mechanical Release Mechanism

⊡ Paracentric Deadbolt Porthole Release in Housing Bottom